KU65 Heavy Duty EGR Bypass Filter

The KU65 Heavy Duty EGR Engine Bypass Filter is the second largest of the FA-ST Engine Bypass Filters: H16.51cm x D18.89cm The unit is ideal for engines with a sump of up to 65 litres and will remove 0.95 litres of water per filter cartridge as well as 1.9Kg of particulate contaminate.

The KU65 housing is for use with diesel EGR engines, heavy industry, and diesel fuel. Suitable for all types of engine oils and can also be used on diesel fuel and light hydraulic oil up to 46 viscosities

• Flow Rate: Output levels are dependent on the viscosity, temperature, and degree of contamination and oil pressure. (Guide for SAE 15W40 oil at 158 degrees F and 60psi, the flow rate would be approx 4 to 7 litres per minute)
• Operating Temperatures: Within operating specifications of engine, gear, and hydraulic oils.
• Operating Pressures: Maximum rating of 10 bar. Lid torque is 23 lbs/foot

Replacement Filter Cartridge for KU65

KF65 filter cartridges: with dirt retention capacity of approx. max 1.9Kg solid particles and approx max 950 ml water. These cartridges come supplied as single filters or boxed quantity of 6. All boxes and individual cartridges contain spare lid seals for filter housings. Cartridges filter fineness of 1μm nom, 3μm absolute. Temperature operating range 0-135°C, +/- 5°C. The stated volumes of oil are only relative to installation of single filter housing. All cartridges are protected by a nylon outer cover with pressed brass ring holder.

On installation the BRASS RINGS MUST BE FACING UPWARDS

Filtration Level: Particulate contamination in accordance with BS 5540 part 4: 1981 and ISO/DIS 4406. ISO 14/9 equivalent to NAS 1638 class 6 - hydraulic oil specification.